Restarting a QNAP NAS
To restart a QNAP NAS, you can follow these steps:
1. Access the NAS Administration Interface
First, open a web browser on your computer and enter the IP address of the NAS in the address bar. Press Enter to access the login page of the NAS administration interface.
2. Login to the NAS Admin Account
Enter your username and password in the respective fields. Click the "Login" button to log in to the administration interface.
3. Go to "Control Panel"
Once you have successfully logged in, you will be presented with the NAS dashboard. Locate and click on the "Control Panel" icon to access the control panel settings.
4. Restart the NAS
Within the Control Panel, find and click the "System" tab. Under the System tab, click on the "Restart" button to initiate the restart process for your QNAP NAS.
Upon clicking the "Restart" button, a confirmation message will appear asking if you want to restart the NAS. Click "OK" to proceed.
5. Wait for the NAS to Restart
The NAS will now begin the restart process. This may take a few minutes. It is important to wait for the NAS to complete the restart before proceeding further with any operations.
6. Access the NAS after Restart
Once the NAS has successfully restarted, you can access it again by returning to the web browser and entering the IP address of the NAS in the address bar. Press Enter and the NAS administration interface should load.
You have successfully restarted your QNAP NAS.